 |
Fan out rigid-flex-multilayer PCB
Length: 80 mm, Thickness: 0,8 mm, 4 flexible layers, fanned out, rigid area completely adhesiveless (thermal cycles), 75 µm conductor width, polyimide coverlay, 50 µm milling tolerance. |
 |
Heatsink PCN with Cooling Pads
Heatsink from 1 mm copper, protruding at 20 areas from underneath up to the TOP layer, forming 20 cooling pads for high-power LEDs. Advantage: no insulation between LED and copper heat sink, minimum thermal resistance. |
 |
Integrated Resistor Metal Foil
Shunts can be formed from PCB technology advantageously especially if a lot of shunts have to be set in parallel. The central resitor foil builts resistors of milliohm order of magnitude. |
 |
5 Meter flexible PCB
Long flexible multilayer from 4 layers copper-polyimide, made of one piece, for space application. Homogeneous foil without foldings or splittings for reliable funktion. |
 |
7 mm thick multilayer PCB
Big PCB or PCBs with a lot of layers for backplanes or chip tester often need total thickness of PCBs of 5 mm and more. Present projects run up to 7 mm.
|
 |
High Temperature Rigid-Flex PCB
Rigid-flex PCB solely from high-temperature material, filled with ceramics and high-Tg-FR4 without any adhesive ply. Temperature cycle resistant due to nearly not affecting plating throug holes.
|
 |
Thick copper PCB with 10 x 105 µm
Total copper thickness: 1,1 mm with only 1,6 mm total PCB thickness. Automotive application for currents up to 120 Amperes. |
 |
PCB for Wafer Tester
High layer count multilayer with galvanic hard gold finish for contact neadle adapters. |
 |
PCB for Embedded Computer
Embedded computer PCB for medical technology. High layer multilayer for fine-pitch BGAs. |
 |
High-Current PCB with Integrated Busbars
Embedded individually formed copper bars to lead currents up to some 100 Amperes and simultaneous electronics cooling of components with high power loss. |
 |
PCB with depth milling
Milled and plated hollow in a PCB for EMC use. |
 |
Semi-flexible Rigid-Flex PCB
Rigid PCB with thinner area to obtain semi-flexibility. |
 |
Cavity in RO3003 PCB
High-frequency PCB from Rogers RO3003 with cavity to assemble buried RF semiconductors. Connection by bond wires without bond loops. |
 |
Rigid-flex PCB
Complex rigid-flexible PCB from polyimide Kapton foils for flexible areas and FR4 for rigid areas, HAL finish. |
